Page 1 of 1
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Sun Apr 26, 2020 3:25 pm
by Firefox
Muttley Black wrote: ↑Sun Apr 26, 2020 3:24 am
Hello sure, but I am not sure if I understand the question. If you mean how this board get power to work the answer is, through the Arduino.
That is what I meant! Thankyou!
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Tue May 05, 2020 12:51 pm
by Muttley Black
Hello all.
This is the final design for my Arduino 4116 Dynamic Ram tester. At least for this version. I can’t wait for my first prototype boards to came and start the testing. After that and if all go smoothly i start the printing for this version. 7~12 dc volt barrel jack fitted in this version to power up the board from external power supply and not only through the Arduino usb,
plus i add some protection for the Arduino
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Tue May 12, 2020 10:57 am
by 1024MAK
Looking good
Mark
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Tue May 12, 2020 12:19 pm
by Muttley Black
Thank you Mark.
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Sun May 31, 2020 8:41 am
by Muttley Black
The prototype pcb's has not yet arrived, but i decided to do some changes for the final version. I reduced the board size. From 12cm x 11cm it was, it came to be a little less than 10cm x 10cm. This is because the cost of its construction is significantly reduced, but also for reasons of space saving.
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Mon Jul 06, 2020 10:16 pm
by Muttley Black
Almost done!
I am waiting some more components to arrive.
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Sat Jul 11, 2020 6:54 pm
by herbert_s
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Sun Jul 26, 2020 2:33 am
by Muttley Black
Waiting the damn inductors to arrive....
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Thu Sep 03, 2020 1:43 pm
by Muttley Black
There was some errors in the prototype PCB. I did some emergency cable jumpers to solve the problem. Now it is ready and 100% in working order. Sadly I need to order some new pcb’s for the final test. This tester work also with 5 volts, through the Arduino usb plug. This future make it a bit portable with a power bank.
[media]
https://vimeo.com/454361906[/media]
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Thu Sep 03, 2020 4:49 pm
by 1024MAK
Ahh, bodge/mod wires are normal for a first version. So don’t worry about it
It’s working, that’s the cool bit
Mark
Re: Arduino 4116 Dram tester with an extrenal help.
Posted: Wed Nov 25, 2020 11:40 am
by Muttley Black