Page 1 of 1
DivMMC EnJOY! Mini - USR Mode 0
Posted: Mon Jan 08, 2018 7:02 pm
by Morpheus
Hi
I have one of these nifty little things and i am really pleased with it apart from one tiny litte thing. Whenever i try and play Uridium be it the first version or the Plus edition. It just resets the Speccy at the end of loading.
They are supposed to be +2 compatible in 48k mode and when you start with the Mini installed it boots to a 48K screen albeit USR 0 - is there anyone who has had the same problem and is there a workaround as Uridium was one of my favourite games and i would dearly love to get it working.
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Tue Jan 09, 2018 9:07 am
by R-Tape
Sorry I can't help with the query but if one wanted to buy a SD - Speccy interface is this the one to get?
I had some bad experiences with a type that hangs out horizontally and not used one since.
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Tue Jan 09, 2018 11:51 am
by Morpheus
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Tue Jan 09, 2018 1:28 pm
by Spud
Would a work around be to load in by tape and save a snapshot on the DivMMC? Or alternatively snapshot it once loaded in an emulator and transfer to the SD Card. IT isn't a multi-load game is it?
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Wed Jan 10, 2018 7:38 am
by lister_of_smeg
Is this a game which writes to port 0x7ffd?
Perhaps try doing...
...before loading the game.
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Wed Jan 10, 2018 10:06 am
by Morpheus
lister_of_smeg wrote: ↑Wed Jan 10, 2018 7:38 am
Is this a game which writes to port 0x7ffd?
Perhaps try doing...
...before loading the game.
Tried that and i didn't work - maybe the .TAP is no good - I'll try another
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Wed Jan 10, 2018 11:37 am
by Spud
I'll dig my plus 2 and divmmc out tonight if I get the chance and test it, too.
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Wed Jan 10, 2018 1:27 pm
by Morpheus
Spud wrote: ↑Tue Jan 09, 2018 1:28 pm
Would a work around be to load in by tape and save a snapshot on the DivMMC? Or alternatively snapshot it once loaded in an emulator and transfer to the SD Card. IT isn't a multi-load game is it?
I tried a Z80 Sanpshot and it just starts right away and no keyboard input works the manta's keep flying into the obstacles.
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Thu Jan 11, 2018 10:34 pm
by Spud
Tried it tonight but my plus 2 is dead
I tested it instead on my Plus 2A - loading a z80 snapsnot created in ZX Spin and it appears to work absolutely fine. I realise +2 and +2a are different beasties, though. Also, mine isn't a DivMMC EmJOY! mini, it's a big chunky one I got a couple of years ago.
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Sat May 02, 2020 4:29 pm
by Luzie
Morpheus wrote: ↑Wed Jan 10, 2018 10:06 am
Tried that and i didn't work - maybe the .TAP is no good - I'll try another
Uridium .TAP-Files seem to be defective. Read here were you can find working ones:
viewtopic.php?f=32&t=2621
Re: DivMMC EnJOY! Mini - USR Mode 0
Posted: Sun May 03, 2020 2:07 pm
by Alessandro
The +2A/+3 are notoriously incompatible with several titles. You can find a list of them and relative fixes
here.
Also, many TAP files in the archive were passively recreated from the TZX ones and will not work with the DivIDE/DivMMC. I made several .TAP files which will run on such devices. Check
this thread.