DivMMC EnJOY! Mini - USR Mode 0
- Morpheus
- Microbot
- Posts: 124
- Joined: Thu Nov 16, 2017 4:18 pm
- Location: Hurworth-On-Tees, UK
- Contact:
DivMMC EnJOY! Mini - USR Mode 0
Hi
I have one of these nifty little things and i am really pleased with it apart from one tiny litte thing. Whenever i try and play Uridium be it the first version or the Plus edition. It just resets the Speccy at the end of loading.
They are supposed to be +2 compatible in 48k mode and when you start with the Mini installed it boots to a 48K screen albeit USR 0 - is there anyone who has had the same problem and is there a workaround as Uridium was one of my favourite games and i would dearly love to get it working.
I have one of these nifty little things and i am really pleased with it apart from one tiny litte thing. Whenever i try and play Uridium be it the first version or the Plus edition. It just resets the Speccy at the end of loading.
They are supposed to be +2 compatible in 48k mode and when you start with the Mini installed it boots to a 48K screen albeit USR 0 - is there anyone who has had the same problem and is there a workaround as Uridium was one of my favourite games and i would dearly love to get it working.
R Tape loading error, 0:1
Re: DivMMC EnJOY! Mini - USR Mode 0
Sorry I can't help with the query but if one wanted to buy a SD - Speccy interface is this the one to get?
I had some bad experiences with a type that hangs out horizontally and not used one since.
I had some bad experiences with a type that hangs out horizontally and not used one since.
- Morpheus
- Microbot
- Posts: 124
- Joined: Thu Nov 16, 2017 4:18 pm
- Location: Hurworth-On-Tees, UK
- Contact:
Re: DivMMC EnJOY! Mini - USR Mode 0
It seems to be really well built. It's a shame that it has no case but it fits flush to my +2B and barely pokes over the top - the only down side is there is no joystick port or pass through edge connector i have taken some picture to show it in real life - very hard to hit it.
R Tape loading error, 0:1
Re: DivMMC EnJOY! Mini - USR Mode 0
Would a work around be to load in by tape and save a snapshot on the DivMMC? Or alternatively snapshot it once loaded in an emulator and transfer to the SD Card. IT isn't a multi-load game is it?
- lister_of_smeg
- Microbot
- Posts: 145
- Joined: Thu Nov 16, 2017 1:44 pm
Re: DivMMC EnJOY! Mini - USR Mode 0
Is this a game which writes to port 0x7ffd?
Perhaps try doing...
...before loading the game.
Perhaps try doing...
Code: Select all
OUT 32765,48
- Morpheus
- Microbot
- Posts: 124
- Joined: Thu Nov 16, 2017 4:18 pm
- Location: Hurworth-On-Tees, UK
- Contact:
Re: DivMMC EnJOY! Mini - USR Mode 0
Tried that and i didn't work - maybe the .TAP is no good - I'll try anotherlister_of_smeg wrote: ↑Wed Jan 10, 2018 7:38 am Is this a game which writes to port 0x7ffd?
Perhaps try doing...
...before loading the game.Code: Select all
OUT 32765,48
R Tape loading error, 0:1
Re: DivMMC EnJOY! Mini - USR Mode 0
I'll dig my plus 2 and divmmc out tonight if I get the chance and test it, too.
- Morpheus
- Microbot
- Posts: 124
- Joined: Thu Nov 16, 2017 4:18 pm
- Location: Hurworth-On-Tees, UK
- Contact:
Re: DivMMC EnJOY! Mini - USR Mode 0
I tried a Z80 Sanpshot and it just starts right away and no keyboard input works the manta's keep flying into the obstacles.
R Tape loading error, 0:1
Re: DivMMC EnJOY! Mini - USR Mode 0
Tried it tonight but my plus 2 is dead
I tested it instead on my Plus 2A - loading a z80 snapsnot created in ZX Spin and it appears to work absolutely fine. I realise +2 and +2a are different beasties, though. Also, mine isn't a DivMMC EmJOY! mini, it's a big chunky one I got a couple of years ago.
I tested it instead on my Plus 2A - loading a z80 snapsnot created in ZX Spin and it appears to work absolutely fine. I realise +2 and +2a are different beasties, though. Also, mine isn't a DivMMC EmJOY! mini, it's a big chunky one I got a couple of years ago.
Re: DivMMC EnJOY! Mini - USR Mode 0
Uridium .TAP-Files seem to be defective. Read here were you can find working ones: viewtopic.php?f=32&t=2621
- Alessandro
- Dynamite Dan
- Posts: 1910
- Joined: Wed Nov 15, 2017 11:10 am
- Location: Messina, Italy
- Contact:
Re: DivMMC EnJOY! Mini - USR Mode 0
The +2A/+3 are notoriously incompatible with several titles. You can find a list of them and relative fixes here.
Also, many TAP files in the archive were passively recreated from the TZX ones and will not work with the DivIDE/DivMMC. I made several .TAP files which will run on such devices. Check this thread.
Also, many TAP files in the archive were passively recreated from the TZX ones and will not work with the DivIDE/DivMMC. I made several .TAP files which will run on such devices. Check this thread.