ZX Spectrum Next

For experts to discuss very technical stuff and newbies to ask why the Spectrum they bought off ebay doesn't work.
User avatar
Posts: 22
Joined: Mon Nov 13, 2017 2:23 pm

Re: ZX Spectrum Next

Post by jmk » Thu Nov 16, 2017 1:31 am

I'm finding it hard to keep up-to-date with the current hardware specs. Initially it was going to run at 7 Mhz with "everything switched on", then it went up to 14 Mhz, which was really impressive. But now it's gone back to 7 Mhz again... Maybe they shouldn't have told anyone that it might run at 14 Mhz. ;)

Also, I was a bit disappointed to hear that it doesn't support ULAplus anymore. It doesn't handle Radastan mode either. It handles the original Spectrum screen and its own hardware extensions, which are admittedly impressive.

Sometimes the only way to find out these details is to read individual comments on Facebook posts. It's not ideal, but I guess they don't want to publicise specs that are not finalised.

Anyway, I am still looking forward to it, whether I end up doing anything with it or not!
0 x
Just like before, it's yesterday once more.

User avatar
Posts: 63
Joined: Mon Nov 13, 2017 12:36 pm

Re: ZX Spectrum Next

Post by Blerkotron » Sat Nov 18, 2017 7:30 pm

Pegaz wrote:
Tue Nov 14, 2017 1:19 pm
btw, does it have any insider information, about release date?
Three months is not a lot of delays if the distribution of the board would start soon.
Email this evening says the 'board only' versions will start shipping November 27th.
0 x

User avatar
Posts: 150
Joined: Mon Nov 13, 2017 1:44 pm

Re: ZX Spectrum Next

Post by Pegaz » Sat Nov 18, 2017 7:58 pm

Thats good.
We need some positive event, to bring back optimism after Vega+ debacle...
1 x

User avatar
Site Admin
Posts: 1596
Joined: Thu Nov 09, 2017 11:46 am

Re: ZX Spectrum Next

Post by R-Tape » Tue Nov 21, 2017 10:11 pm

Is there a list anywhere, or can anyone summarise the likely final features of the Next? (Hardware sprites, SID etc)
0 x

Posts: 8
Joined: Thu Dec 28, 2017 6:15 pm

Re: ZX Spectrum Next

Post by Whacker » Thu Dec 28, 2017 8:37 pm

Any news on when a 2nd round of orders might start..? or when the next schematic is made available to clones?
0 x

User avatar
Posts: 188
Joined: Wed Nov 15, 2017 2:52 pm
Location: Sunny Somerset in the U.K. in Europe

Re: ZX Spectrum Next

Post by 1024MAK » Fri Dec 29, 2017 7:27 am

Whacker wrote:
Thu Dec 28, 2017 8:37 pm
Any news on when a 2nd round of orders might start..? or when the next schematic is made available to clones?
That I don't know. But hopefully everyone who ordered a PCB only, or a PCB with the rest to follow, should now have their PCB.
I understand that some PCBs have been held up within the various postal systems :-(

0 x

Posts: 42
Joined: Mon Dec 04, 2017 8:55 pm

Re: ZX Spectrum Next

Post by namco » Fri Dec 29, 2017 1:19 pm

I didn't back it as I had little money at the time but I am looking forward to a retail release.

I have a couple of planned projects for it - one starting fairly soon and the other starting at the end of the year (2018).
0 x

User avatar
Posts: 151
Joined: Sun Nov 12, 2017 8:50 pm

Re: ZX Spectrum Next

Post by Spud » Fri Dec 29, 2017 1:39 pm

I didn't back it either, but wish I had. I'll probably buy one eventually at retail as long as it isn't prohibitively expensive at whatever time that is.
0 x

User avatar
Manic Miner
Posts: 331
Joined: Thu Nov 16, 2017 3:26 pm

Re: ZX Spectrum Next

Post by RMartins » Sat Dec 30, 2017 3:54 am

I got my PCB two weeks ago, but have not had a chance to power it up yet.

They changed the Power plug polarity !!!
On Next, Center is Positive, and outer is negative.

So DO NOT connect an original Sinclair power supply to it, or you will probably fry the thing.

Go read the FAQ, to prevent burning your board, by assuming things.
I almost did connect it, but I was concerned, so I searched for info about it, and found it on the website.

I won't be surprised, if someone just assumes (logically), that the old bricks should make it work.

I'm not sure, if the power plug polarity change was a good or bad idea:
- Good, because most modern power supplies are reversed when compared with the Spectrum.
- Bad, if the Next is not Protected against reverse polarity, it can be "Magic Smoke" on first try.
NOTE: it doesn't look like it has any reverse polarity protection, at least I have not seen any Input Power Diode in there.

Keeping it as it was, retro compatible, would probably be safer, and would also allow us to use the old power bricks.

It also seems weird that you can plug old interfaces to the thing, but not the power supplies.
This change doesn't make much sense to me, since there is a risk involved, and not much to gain from the change.
0 x

User avatar
Posts: 44
Joined: Wed Mar 21, 2018 1:10 pm
Location: Texas USA

Re: ZX Spectrum Next

Post by beanz » Wed Mar 21, 2018 5:56 pm

Had mine about 3 months now. Pleased with it (housed it in a 48k case). You guys saying you will buy retail, don't think there are any plans for a retail release...at least none have been announced or spoken of.

Cased Nexts are a couple of months behind as were the "just the boards" but I don't doubt they'll be shipping.
0 x

Post Reply