"Step out" in a debugger

Struggling with Fuse or trying to find an emulator with a specific feature. Ask your questions here.
Post Reply
Posts: 116
Joined: Mon Nov 13, 2017 6:55 pm
Location: New Forest, UK

"Step out" in a debugger

Post by dfzx » Sat Sep 29, 2018 6:49 pm

The Fuse debugger has a "finish" feature which is sort of like the "step out" feature of other debuggers. The idea is that it runs to the end of the current subroutine. Only in Fuse it's implemented by placing a temporary breakpoint at the address at SP, which really isn't ideal. If the subroutine has done anything with the stack the feature is going to fail.

I was thinking about reimplementing this a different way. One way would be to collect a stack of return addresses by hooking into the emulator's CALL, CALL cc and RST instructions. "Step out" can then just put a temporary breakpoint at the address at the head of this "internal" stack.

It then occurred to me that maybe it's possible to implement it simply by hooking into the emulator's RET and RET cc instructions. Set an internal flag when the user does a "step out" and check for that flag at return instructions. If found, execute the return then stop at the next instruction.

I prefer the first option because it allows a stack trace to be generated and presented. But the second way appears temptingly simple. Is there a reason the second way wouldn't work?
0 x

Manic Miner
Posts: 200
Joined: Mon Nov 13, 2017 5:12 am

Re: "Step out" in a debugger

Post by AndyC » Sat Sep 29, 2018 9:41 pm

Either way can be defeated by weird enough code, but if I were implementing it I'd go for "step out" being equivalent to "run until a RET occurs" - it's probably what most developers would expect to happen and I suspect will give the right behaviour 99% of the time.
0 x

User avatar
Einar Saukas
Manic Miner
Posts: 605
Joined: Wed Nov 15, 2017 2:48 pm

Re: "Step out" in a debugger

Post by Einar Saukas » Sat Sep 29, 2018 11:04 pm

Agreed. However I suggest "run until the number of RETs exceeds the number of CALLs". For instance:

Code: Select all

    LD B,8    <--- current position
    CALL subroutine
    DJNZ loop
In this example, stepping out should happen upon reaching the second RET, not the first.
0 x

Post Reply