[mention]hikoki[/mention] [mention]zx81[/mention] Changing to another PSU doesn't change anything.
Adding this to cdmline.txt :
usbpowerdelay=100
separated with a space on the same line doesn't change anything as well.
I keep getting the message that I "have to change the keyboard membr".
I tried without batterys in the Recreated ZX Spectrum since they could use current for charching. No change
I tried starting with the keyboard switched off. No change
I tried starting in Mode B. No change
I used another SD card with Retropie and FUSE 1.3 or ZEsarUX81 and then the Recreated ZX Spectrum works fine. Switched on or off seems only to affect Bluetooth pairing possibilities. Connecting via USB to Retropie seems not affected by the power switch of the Recreated ZX Spectrum.
I have got another question. Is there a parameter I can use to tell the zx baremulator to use another aspectratio. On my 10 inch 4:3 monitor the image is to much a square instead of a 4:3 TV screen. While my normal 16:9 monitor gives a good image.
Thanks
Jeroen
Last edited by adonet on Tue Apr 24, 2018 6:05 pm, edited 1 time in total.
[mention]adonet[/mention]
The image format is controlled by PI firmware and the TV set, not by ZXB. You can try to play with parameters on config.txt file.
^^^ you are welcome. You may want to try this
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1