C64 Standard Bitmap Mode (320 x 200)
Re: C64 Standard Bitmap Mode (320 x 200)
My first Spectrum was a Timex and probably because of the NTSC the color palette was definitely different. I remember a green tinted "cyan" and more warm "red" that looked fantastic on Deathchase.
On top of that, all levels of bright were visible, including the bright black, and because of that some screens and games looked funny. I'm still looking for an emulator that can recreate both.
The pallette Lethargeek shows above is interesting, because fully saturated colors look bad on a CRT TV, pretty sure most of us always played with more comfortable colors.
On top of that, all levels of bright were visible, including the bright black, and because of that some screens and games looked funny. I'm still looking for an emulator that can recreate both.
The pallette Lethargeek shows above is interesting, because fully saturated colors look bad on a CRT TV, pretty sure most of us always played with more comfortable colors.
Re: C64 Standard Bitmap Mode (320 x 200)
ZXEmuT can emulate "bright black". it is also technically possible to replace the default palette with Tcl API. so the only two things you need is GNU/Linux for ZXEmuT, and proper RGB values. ;-)druellan wrote: ↑Sat Aug 08, 2020 12:11 pm My first Spectrum was a Timex and probably because of the NTSC the color palette was definitely different. I remember a green tinted "cyan" and more warm "red" that looked fantastic on Deathchase.
On top of that, all levels of bright were visible, including the bright black, and because of that some screens and games looked funny. I'm still looking for an emulator that can recreate both.
- Lethargeek
- Manic Miner
- Posts: 743
- Joined: Wed Dec 11, 2019 6:47 am
Re: C64 Standard Bitmap Mode (320 x 200)
Re: C64 Standard Bitmap Mode (320 x 200)
Remember that these machines have analog TV outputs, and TV signals are not RGB - they are based on luminance, chroma and saturation.Lethargeek wrote: ↑Sat Aug 08, 2020 8:48 am also even the standard existing spectrum palette could be improved a bit with uneven brightness for different colors:
And the palete does vary along luminance
If you have perfect electronics and a perfectly calibrated screen then yes, you get equal brightness.
But in practice CRTs are not calibrated, with most people just setting them to whatever looks better, and that would make the brightness differences visible.
And of course colours would mix horizontally (especially on RF connections), since colour resolution is lower than the actual pixels.
That would also reduce saturation.
So your palette is a good approximation to what was seen back in the day.
(Sorry for the late comment but I've been in places with no internet or mobile network!)
- Lethargeek
- Manic Miner
- Posts: 743
- Joined: Wed Dec 11, 2019 6:47 am
Re: C64 Standard Bitmap Mode (320 x 200)
late Spectrum models got RGB and many (if not most) even 48k soviet clones were RGB-only
brightness differences between the primary color components, thus affecting several palette colors at once4thRock wrote: ↑Mon Aug 10, 2020 3:53 pm If you have perfect electronics and a perfectly calibrated screen then yes, you get equal brightness.
But in practice CRTs are not calibrated, with most people just setting them to whatever looks better, and that would make the brightness differences visible.
color resolution is irrelevant as we're talking brightness
no, as i said, it was impossible to tweak the relative brightness for the each color separately with just TV settings
Re: C64 Standard Bitmap Mode (320 x 200)
Well, I only had a good RGB capable TV in the late 2000s. I doubt many people used anything other than RF.Lethargeek wrote: ↑Mon Aug 10, 2020 7:35 pm late Spectrum models got RGB and many (if not most) even 48k soviet clones were RGB-only
So my comments are about regular RF connections on late 1980's TV.
Here's a capture from real hardware (at 1:25). Don't know if it's RF or composite video, but it's PAL signal:
https://youtu.be/SrXFNqxPUHw?t=84
Colours are still bright and saturated, but little differences have appeared.
For example, on the boat Yellow is about #E3E300; on the sky Cyan is #52FFFF, etc.
My point is that both systems looked good back in the day.
They took advantage of existing tech, and the user would optimize the TV settings to get the best picture.
- Lethargeek
- Manic Miner
- Posts: 743
- Joined: Wed Dec 11, 2019 6:47 am
Re: C64 Standard Bitmap Mode (320 x 200)
So what? Almost none of the soviet TVs did have RGB input either. People were needed to add it themselves or to call a service technician.
this looks too good to be RF, but too bad for RGB i remember (and since the title says +3/+2A maybe a composite mod?)
as i said, very limited and rough "optimizations"
just can't get some color combos to become more readable without breaking the other ones
Re: C64 Standard Bitmap Mode (320 x 200)
Hi
My computers during the 8 bit golden age were a speccy clone, - the Timex TC2048 and the C64.
I find so silly the wars between the difference scenes, specially these days. I love all retro computers and now I own not only those two I mentioned above but others too.
Regarding the Commodore colours as an amateur artist I think the palette was very well thought out, it works very well in general but it wouldn't have hurt to an optional palette with some full saturated colours!I think the colodore palette is the closest to the real thing and as someone else has mentioned we always could intensify or mute the colours according to our taste using the TV or CRT monitor settings. Regarding the 320x200 hires mode, it was not that much used it is true but it not only had higher resolution than the Speccy but also regarding the attributes it was a bit more advanced as it allowed any of the 16 colours as ink or paper (perhaps this was mentioned before but I didn't read all of the thread yet).
I like coding games for retro computers and one of my latest projects is Patolas' Adventures #1 and on the C64 it is looking like this:
[media]https://youtu.be/3EqQf9mjv1c[/media]
And I just love how it looks, this video capture was taken from an emulator using the colodore palette. What do you think?
I also have been working on two mock ups one for the Speccy 48k :
and the other for the Timex Hicolour mode:
I love how the game looks on the 3 computers, each one has its strengths.
My computers during the 8 bit golden age were a speccy clone, - the Timex TC2048 and the C64.
I find so silly the wars between the difference scenes, specially these days. I love all retro computers and now I own not only those two I mentioned above but others too.
Regarding the Commodore colours as an amateur artist I think the palette was very well thought out, it works very well in general but it wouldn't have hurt to an optional palette with some full saturated colours!I think the colodore palette is the closest to the real thing and as someone else has mentioned we always could intensify or mute the colours according to our taste using the TV or CRT monitor settings. Regarding the 320x200 hires mode, it was not that much used it is true but it not only had higher resolution than the Speccy but also regarding the attributes it was a bit more advanced as it allowed any of the 16 colours as ink or paper (perhaps this was mentioned before but I didn't read all of the thread yet).
I like coding games for retro computers and one of my latest projects is Patolas' Adventures #1 and on the C64 it is looking like this:
[media]https://youtu.be/3EqQf9mjv1c[/media]
And I just love how it looks, this video capture was taken from an emulator using the colodore palette. What do you think?
I also have been working on two mock ups one for the Speccy 48k :
and the other for the Timex Hicolour mode:
I love how the game looks on the 3 computers, each one has its strengths.
- Einar Saukas
- Bugaboo
- Posts: 3143
- Joined: Wed Nov 15, 2017 2:48 pm
Re: C64 Standard Bitmap Mode (320 x 200)
Please take a look at the NIRVANA+ Engine. In a standard Speccy 48K, instead of this:
you will be able to have something like this:
you will be able to have something like this:
Re: C64 Standard Bitmap Mode (320 x 200)
Thanks for the suggestion!Einar Saukas wrote: ↑Fri Mar 05, 2021 5:51 pm Please take a look at the NIRVANA+ Engine. In a standard Speccy 48K, instead of this:
Re: C64 Standard Bitmap Mode (320 x 200)
And also take a look at ULA+
https://sites.google.com/site/ulaplus/
https://sites.google.com/site/ulaplus/
Re: C64 Standard Bitmap Mode (320 x 200)
Another great idea for a possible version. thx4thRock wrote: ↑Fri Mar 05, 2021 6:31 pm And also take a look at ULA+
https://sites.google.com/site/ulaplus/
Re: C64 Standard Bitmap Mode (320 x 200)
That was a fun read. Why didn't cartridges use the 320X200 mode? It seems like a real waste of hi resolution. I am allergic to the C64's BASIC but I think the games on it are really good, and many times better than our Speccys but maybe not as original in design.
Alex
Re: C64 Standard Bitmap Mode (320 x 200)
Lots of games use the high resolution character modes (because you can mix and match high and low res characters on the same screen). The bitmap modes, in general, are better suited to static screens and by and large the low Res modes with more colours give a better result (or one of the funky screen modes caused by fiddling registers on the fly much like multicolour Speccy graphics).