Hi All,
I have created a image on my pc using a MS Paint and then I have converted it to a .scr image.
Is there any easy way to get this to a .dsk file that I have created on the Fuse emulator.
I have checked various tools but cannot find one to add .scr images to a +3 disk. While creating them on Windows 10.
Spectrum .scr to +3 disk using Fuse Emulator
Re: Spectrum .scr to +3 disk using Fuse Emulator
Here's one way.
1. Start Fuse in +3 mode and go into +3 BASIC
2. From the Media menu select Disk > +3 > Drive A: > Insert New...
3. Type FORMAT "A:" and wait for it to finish
4. Type the following: PAUSE 0: SAVE "MYSCREEN.SCR" SCREEN$ and hit enter
5. From the File menu select Screenshot > Open SCR Screenshot... and choose your file
6. Press Enter and wait for the OK message on save completion
7. From the Media menu select Disk > +3 > Drive A: > Save As... and give it a name
1. Start Fuse in +3 mode and go into +3 BASIC
2. From the Media menu select Disk > +3 > Drive A: > Insert New...
3. Type FORMAT "A:" and wait for it to finish
4. Type the following: PAUSE 0: SAVE "MYSCREEN.SCR" SCREEN$ and hit enter
5. From the File menu select Screenshot > Open SCR Screenshot... and choose your file
6. Press Enter and wait for the OK message on save completion
7. From the Media menu select Disk > +3 > Drive A: > Save As... and give it a name
Re: Spectrum .scr to +3 disk using Fuse Emulator
Thank you. Damieng