Enigma Tape Magazine
Moderator: pavero
Enigma Tape Magazine
Here's an interesting development on t'other forum...
Enigma Tape Magazine issues 1-4 are completely MIA, issue 8 is .TAP only, and issues 8-9 are likely to be the versions found on Sinclair User rather than "in the wild", in case there's any difference. On briefly testing the archived copy of issue 5 I find it's got SAM Coupé data on it with even the pilot tone being very high-pitched (hence I'd assume it was saved with DEVICE t35, for those of you who speak SAM-ese). Hence, this is going to be a very tricky job to archive the tapes.
Helpfully, tape 5 contains a message "ripped by Dr. Titus", so we know who managed to get it working and TZXed properly.
As you can see, I've asked Louise to drop me an email so I can at least provide some kind of link between World Of Chit-Chat And Not A Lot Of Spectrum these days, and the experts who live here. I think Dr. Titus is mostly found on Russian forums these days, though communication shouldn't be too difficult. It could be that Enigma issue 1 is just completely standard data, but given that we're clearly dealing with "nerds from back in the day" (Hamish Rust is involved, and that's a name I recognise as a regular on 1990s covertapes), I suspect it won't be, and there will be lots of custom loaders to trip over, as well as data from the Spectrum's older illegitimate son.
Enigma Tape Magazine issues 1-4 are completely MIA, issue 8 is .TAP only, and issues 8-9 are likely to be the versions found on Sinclair User rather than "in the wild", in case there's any difference. On briefly testing the archived copy of issue 5 I find it's got SAM Coupé data on it with even the pilot tone being very high-pitched (hence I'd assume it was saved with DEVICE t35, for those of you who speak SAM-ese). Hence, this is going to be a very tricky job to archive the tapes.
Helpfully, tape 5 contains a message "ripped by Dr. Titus", so we know who managed to get it working and TZXed properly.
As you can see, I've asked Louise to drop me an email so I can at least provide some kind of link between World Of Chit-Chat And Not A Lot Of Spectrum these days, and the experts who live here. I think Dr. Titus is mostly found on Russian forums these days, though communication shouldn't be too difficult. It could be that Enigma issue 1 is just completely standard data, but given that we're clearly dealing with "nerds from back in the day" (Hamish Rust is involved, and that's a name I recognise as a regular on 1990s covertapes), I suspect it won't be, and there will be lots of custom loaders to trip over, as well as data from the Spectrum's older illegitimate son.
Spectribution: Dr. Jim's Sinclair computing pages.
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
- Einar Saukas
- Bugaboo
- Posts: 3215
- Joined: Wed Nov 15, 2017 2:48 pm
Re: Enigma Tape Magazine
Interesting!
Does it mean Enigma #5 is actually a program for SAM? It seems to crash when loaded in a Spectrum 48K...
Does it mean Enigma #5 is actually a program for SAM? It seems to crash when loaded in a Spectrum 48K...
Re: Enigma Tape Magazine
There should be a mixture of Spectrum and SAM Coupé content in there, judging by the opening message after the first header has loaded.
Spectribution: Dr. Jim's Sinclair computing pages.
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Re: Enigma Tape Magazine
Asked Titus to convert waves to tzx long time ago. As i can remember, one block in ETM5 was overwritten by the game and Titus took it from another issue. Probably mates from World of Sam might have Enigma tape magazine for Sam Coupe on their disks, but it seems just almost unbelievable.
E.G., Fred 22/29 Sam magazine have Enigma music demo included. Do we have anyone related with Sam Coupe and World of Sam ?
https://www.worldofsam.org/products/fred-22
https://www.worldofsam.org/products/fred-29
E.G., Fred 22/29 Sam magazine have Enigma music demo included. Do we have anyone related with Sam Coupe and World of Sam ?
https://www.worldofsam.org/products/fred-22
https://www.worldofsam.org/products/fred-29
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
Hi all,
I'm Louise from the other forum. I've been liaising with TMD2003 (please tell me I typed that right) to sort out the Enigma issues I have into wav files. I've just managed to do the first one and I've scanned a fair amount of Letters/documents from PD things I had of which TMD has the google drive link.
I'm continuing to encode more and I'm verifying on FUSE wav loading as I pass on. There are things I don't know and I appreciate the help.
Thanks,
Louise
I'm Louise from the other forum. I've been liaising with TMD2003 (please tell me I typed that right) to sort out the Enigma issues I have into wav files. I've just managed to do the first one and I've scanned a fair amount of Letters/documents from PD things I had of which TMD has the google drive link.
I'm continuing to encode more and I'm verifying on FUSE wav loading as I pass on. There are things I don't know and I appreciate the help.
Thanks,
Louise
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
Oh I forgot to add that all the Enigma issues are fastloaders as far as I recall (Issue 1 definitely is, and I see no reason that they would change).
Only the instruction sheet for issue 5 and up mention SAM Coupe explicitly and it's also the first issue that no longer mentions the 48K Spectrum.
Thanks,
Lou
PS Any demos on the tapes may or may not be fastloaders.
Only the instruction sheet for issue 5 and up mention SAM Coupe explicitly and it's also the first issue that no longer mentions the 48K Spectrum.
Thanks,
Lou
PS Any demos on the tapes may or may not be fastloaders.
Re: Enigma Tape Magazine
Stick an @ symbol in front of it and it'll alert me. Anyway, hi. I can confirm that there are not only turbo loaders on the tapes, but the one I'm analysing and trying to get to work at the moment (Enigma #1) has higher-speed pilot tones as well.LouEnPointe wrote: ↑Sat Jul 15, 2023 8:57 pm Hi all,
I'm Louise from the other forum. I've been liaising with TMD2003 (please tell me I typed that right)
Glass is the only game I know of that uses any kind of turbo loader with higher-speed pilot tones; it displayed "Searching:" and "Loading:" prompts, and Enigma #1 does as well, so it may be that it's a better-known routine than I'd thought. Glass TZXed well, so The Enigma Project should be possible for those who know what they're doing with TZX converters. This, annoyingly, is not me - I always run into problems when turbo loaders come up, especially something that's non-standard. It does sound, to my ears, like a very basic 150% speed turbo loader - all the raster bars are standard colours - so it shouldn't be too hard... right?
I can confirm that most of the WAV of Enigma #1 works as it should, including everything with a turbo-loader. There's a few unlisted programs at the end which are a bit dodgy and may or may not be an intended part of the magazine - there's a block of scrap data between the last listed program and the extra bits, similar to what Simon Ulyett has a habit of doing with his Cronosoft tapes when he's re-used an old tape with a previous title on it. Two of the extra programs were Hamish Rust's work, so it may be intentional, or it might have been one of his old test tapes that slid through the net...
Spectribution: Dr. Jim's Sinclair computing pages.
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Re: Enigma Tape Magazine
BTW, welcome to the forum, @LouEnPointe
Re: Enigma Tape Magazine
Hi @LouEnPointe, how many issues of ETM do you have in wav files ?
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
Issues One through Nine and they're from the authors ESD, so no magazine covermount issues.
I've just finished encoding 1 through 4 into wav files - the azimuth tweaking is annoying and the margin for error in the signal of the tapes is small. I've scanned all the paper info I have as well.
I'm about to try number 5.
And thank you for the welcome
PS I need to go back to issue 1 as the Denizen's demo doesn't like working under Fuse's fast loader as part of a larger wav. Strip it out, fine. Put it in, and it's not happy. I'll go back to that last.
I've just finished encoding 1 through 4 into wav files - the azimuth tweaking is annoying and the margin for error in the signal of the tapes is small. I've scanned all the paper info I have as well.
I'm about to try number 5.
And thank you for the welcome
PS I need to go back to issue 1 as the Denizen's demo doesn't like working under Fuse's fast loader as part of a larger wav. Strip it out, fine. Put it in, and it's not happy. I'll go back to that last.
Re: Enigma Tape Magazine
Can you share wav files and i will ask Dr.Titus to help with it using his TapeRecover tool ?
https://vtrd.in/pcutilz/TAPRC201.zip
https://vtrd.in/pcutilz/TAPRC201.zip
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
It's all still a work in progress. I'll post the link, but I'm not posting wavs until I know they load in Fuse.
At present 1, 2, 3, 4, and 9 are there.
Please recognise that I would rather not have three or four people saying to do things different ways as I am prone to panic attacks caused by work hence dealing with one person. So I'm doing this in good faith.
https://drive.google.com/drive/folders/ ... sp=sharing
There is a README.txt in each Enigma tape directory that indicates issues if any.
Thanks,
Louise
At present 1, 2, 3, 4, and 9 are there.
Please recognise that I would rather not have three or four people saying to do things different ways as I am prone to panic attacks caused by work hence dealing with one person. So I'm doing this in good faith.
https://drive.google.com/drive/folders/ ... sp=sharing
There is a README.txt in each Enigma tape directory that indicates issues if any.
Thanks,
Louise
Re: Enigma Tape Magazine
Thank you so much Louise! We will help you convert it to tap format.
Re: Enigma Tape Magazine
TZX would be a hell of a lot better with those turbo loaders involved...
Spectribution: Dr. Jim's Sinclair computing pages.
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
I can confirm that those unlisted programs should be at the end of Enigma 2.TMD2003 wrote: ↑Sun Jul 16, 2023 12:07 am I can confirm that most of the WAV of Enigma #1 works as it should, including everything with a turbo-loader. There's a few unlisted programs at the end which are a bit dodgy and may or may not be an intended part of the magazine - there's a block of scrap data between the last listed program and the extra bits, similar to what Simon Ulyett has a habit of doing with his Cronosoft tapes when he's re-used an old tape with a previous title on it. Two of the extra programs were Hamish Rust's work, so it may be intentional, or it might have been one of his old test tapes that slid through the net...
ie. The Denizen demo
Sound Sampler (Sample something and play it back slower or faster)
Word Count for Tasword 2
Unerase program for +D owners.
Info gleaned from a page in the documents I scanned. So despite Denizen demo on Enigma 2 missing a block, we could take the missing block from the unexpected one at the end of Enigma 1.
Re: Enigma Tape Magazine
This is all sounding very good. Knowing officially where Enigma #1 starts and ends means it can be cleaned up enough to give a TZX converter the maximum chance of success.
I should have more of a chance to get to grips with some of this on Thursday.
I should have more of a chance to get to grips with some of this on Thursday.
Spectribution: Dr. Jim's Sinclair computing pages.
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Re: Enigma Tape Magazine
The previous 6 issue does not have one block, it was erased and overwritten by the game:
https://spectrumcomputing.co.uk/entry/2 ... ne_issue_6
but now we should have full complete ussue.
https://spectrumcomputing.co.uk/entry/2 ... ne_issue_6
but now we should have full complete ussue.
Re: Enigma Tape Magazine
Sounds like fantastic! Looking for missing issues since 1996.
Re: Enigma Tape Magazine
The chances are, @LouEnPointe was the first person to have read any of the reviews from Enigma #1 in over 30 years, and I was the second. Who wants to be the third? The day is just around the corner.
Spectribution: Dr. Jim's Sinclair computing pages.
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
Features my own programs, modified type-ins, RZXs, character sets & UDGs, and QL type-ins... so far!
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
Enigma 8 is now there.
Block 7 - starting 17:20 in the wav has a dropout midway through. Roundabout 18:10-18:20 for a fraction of a second. Unloadable block.
Maybe someone can work some magic
Block 7 - starting 17:20 in the wav has a dropout midway through. Roundabout 18:10-18:20 for a fraction of a second. Unloadable block.
Maybe someone can work some magic
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
And Enigma 7 is there are well.
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
Enigma 6 done and there.
Only Issue 5 left to do. That's for tomorrow.
Only Issue 5 left to do. That's for tomorrow.
Re: Enigma Tape Magazine
I've also got some Enigma tape magazines if extra samples will help out?
I've got issues 1, 3, 5, 7, 8 ans 9 plus a disassembler cassette.
Steve
I've got issues 1, 3, 5, 7, 8 ans 9 plus a disassembler cassette.
Steve
- LouEnPointe
- Drutt
- Posts: 22
- Joined: Sat Jul 15, 2023 6:22 pm
- Location: Scotland
Re: Enigma Tape Magazine
And that's 5 there as well
Re: Enigma Tape Magazine
Hi Steve,
can you dump them all for any case and also to clear about same files in 1 and 2 issues, also 9 issue seems to have bad blocks, and very interesting about dissassembler cassette.