¡Jarl, torpedos!
Hi, all!
I've got a Zx DivIDE 57c as this one:
and it's has the FatWare BIOS, but i'd like to upgrade it to the last version of ESXDOS, as it has better interface, paging, fonts, an so. Is it possible to upgrade this DivIDE? How could I "burn" the ESXDOS BIOS into the DivIDE?
Thanx!!
Upgrading a DivIDE 57c
Upgrading a DivIDE 57c
If something works, don't touch it !!!! at all !!!
- 1024MAK
- Bugaboo
- Posts: 3123
- Joined: Wed Nov 15, 2017 2:52 pm
- Location: Sunny Somerset in the U.K. in Europe
Re: Upgrading a DivIDE 57c
Lots of information on the site DivIDE here.
Also check the ESXDOS site here.
If you have EEPROM or flash ROM chip, then you just need the appropriate program running on the Spectrum to “burn” (program) the new code in it.
I can’t remember the details, but hopefully one of the two websites above may help.
Mark
Also check the ESXDOS site here.
If you have EEPROM or flash ROM chip, then you just need the appropriate program running on the Spectrum to “burn” (program) the new code in it.
I can’t remember the details, but hopefully one of the two websites above may help.
Mark
Standby alert
“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
Re: Upgrading a DivIDE 57c
Take a look here:
https://velesoft.speccy.cz/zx/divide/divide-jumpers.htm
You must follow the instructions on ESXDos page to prepare your card then burn the EPROM as link above.
https://velesoft.speccy.cz/zx/divide/divide-jumpers.htm
You must follow the instructions on ESXDos page to prepare your card then burn the EPROM as link above.
Creator of ZX App: https://play.google.com/store/apps/deta ... boys.zxapp