is there an emulator that supports the sid?

[777]

cant find one on google. not the ay emulator btw. something that emulates a real sid

[stupidget]

The NEXT has a SID Player:

https://www.specnext.com/nextsid-tracki ... 20computer.

So you could use that in a NEXT Emulator:

https://www.specnext.com/emulating-the-next-zesarux/

[777]

The NEXT has a SID Player:

https://www.specnext.com/nextsid-tracki ... 20computer.

So you could use that in a NEXT Emulator:

https://www.specnext.com/emulating-the-next-zesarux/

it uses the 3 ay chips and also i would like it to play on a spectrum not a next. but thank you

[stupidget]

There was this thread a few years back:

viewtopic.php?t=2786&hilit=SID+Player

But you need a DIVmmc on real hardware, but now that you can emulate DIVmmc in FUSE Maybe that's an option?

[777]

There was this thread a few years back:

viewtopic.php?t=2786&hilit=SID+Player

But you need a DIVmmc on real hardware, but now that you can emulate DIVmmc in FUSE Maybe that's an option?

again this is using ay's

[flatduckrecords]

How about SimCoupé? It supports SID emulation, and the emulated SAM can itself emulate a 48K Spectrum. I haven't tried but the emulated-SID is on port &d4 so the emulated-Spectrum should be able to access it?

[Xela]

The NEXT has a SID Player:

https://www.specnext.com/nextsid-tracki ... 20computer.

It's not a SID player. It plays "PT3 Like SID".

[Xela]

something that emulates a real sid

https://github.com/cybern0id/NSID_Emu/t ... xCF%20port

[SamC]

cant find one on google. not the ay emulator btw. something that emulates a real sid

LnxSpectrum has an "experimental" (testing, unfinished?) emulation of the SID from the eLeMeNt ZX/MB hardware.

Code: Select all

eLeMeNt ZXi range
  30779  h783B   port0 - select port column hx00 - hxFF
  31035  h793B   port1 = column1/row1 = e_zxi_000 to e_zxi_0FF

e_zxi_002 - Audio output
	bit0 = enable ULA audio
	bit1 = enable TurboSound FM
	bit2 = enable MonsterBlaster (SounDrive, etc.)
	bit3 = enable SID (C64 sound chip)
	bit4 = enable SAA1099 (SamCoupe sound chip)
	bit5 = enable TAPE input

Sound interface device (SID)
	27707  h6C3B	select SID Control Register
	27963  h6D3B	read/write selected SID Control Register

SID registers
	h00-h1C = original SID registers
	h1F = SID type and frequency
	h20 = more SIDs (not implemented yet)

SID parameters
	h1F = select SID parameters
		bit 0	= SID type: 0-6581; 1-8580
		bit 1	= frequency: 0-PAL  1-NTSC (985248Hz for PAL C64, 1022730Hz for NTSC C64)
 		bits 2-7 = always 0