Using a Microdrive without a visible Interface 1.
https://www.youtube.com/watch?v=CAOfoopk8Lg
The latest ZXDB update will be applied this evening at 1800 BST. The update takes around 30 minutes, and the site goes down whilst this happens.
A Spectrum clone with built-in Interface 1?
A Spectrum clone with built-in Interface 1?
Last edited by 8BitSC on Sun Nov 05, 2023 5:19 pm, edited 1 time in total.
Re: A Spectrum clone with built-in Interface 1?
Text description (via Firefox Translate) reads:
This ZX Spectrum Clone integrates a 48K Spectrum with a 512KB LEC memory expansion and a Microdrive on a single board. In addition, an AY-3-8910 sound chip, a Kempston joystick, a RAM and ROM paging port, full 8-bit I/O decoding, an IntAck and IM2 suitable interrupt control, no susceptibility to Rain effects, etc.
This ZX Spectrum Clone integrates a 48K Spectrum with a 512KB LEC memory expansion and a Microdrive on a single board. In addition, an AY-3-8910 sound chip, a Kempston joystick, a RAM and ROM paging port, full 8-bit I/O decoding, an IntAck and IM2 suitable interrupt control, no susceptibility to Rain effects, etc.
Re: A Spectrum clone with built-in Interface 1?
Absolutely awesome.
Re: A Spectrum clone with built-in Interface 1?
BTW, this project by Martin S. is being discussed in this thread over at the German Spectrum forum. Development is making good progress. First revision of the PCB is almost done, and the OqtaDrive Microdrive emulator has just been enhanced to work with CP/M.