Spectrum .scr to +3 disk using Fuse Emulator

Share graphical tips, notes and queries related to our favourite screen layout and its editors.
Post Reply
Glenjamin
Berk
Posts: 4
Joined: Tue Mar 24, 2020 1:00 pm

Spectrum .scr to +3 disk using Fuse Emulator

Post by Glenjamin » Wed Mar 25, 2020 5:44 pm

Hi All,

I have created a image on my pc using a MS Paint and then I have converted it to a .scr image.

Is there any easy way to get this to a .dsk file that I have created on the Fuse emulator.

I have checked various tools but cannot find one to add .scr images to a +3 disk. While creating them on Windows 10.
0 x

damieng
Berk
Posts: 11
Joined: Wed Nov 15, 2017 1:45 am

Re: Spectrum .scr to +3 disk using Fuse Emulator

Post by damieng » Wed Mar 25, 2020 5:56 pm

Here's one way.

1. Start Fuse in +3 mode and go into +3 BASIC
2. From the Media menu select Disk > +3 > Drive A: > Insert New...
3. Type FORMAT "A:" and wait for it to finish
4. Type the following: PAUSE 0: SAVE "MYSCREEN.SCR" SCREEN$ and hit enter
5. From the File menu select Screenshot > Open SCR Screenshot... and choose your file
6. Press Enter and wait for the OK message on save completion
7. From the Media menu select Disk > +3 > Drive A: > Save As... and give it a name
1 x

Glenjamin
Berk
Posts: 4
Joined: Tue Mar 24, 2020 1:00 pm

Re: Spectrum .scr to +3 disk using Fuse Emulator

Post by Glenjamin » Wed Mar 25, 2020 5:58 pm

Thank you. :D Damieng
0 x

Post Reply