And once more got 4 divide's , 6 speccy's and none of them works in whatever combination i try .
So , in short i must have missed something .................
all have the same symptoms , no boot screen , nmi button only resets the speccy .
any help ??
divide 57c not working
divide 57c not working
- Zx81-16k exp.- Spectrum 48 - Spectrum 128- Interface 1& 2 - DIVide - Zx flashcard- Zx printer - Ram turbo-Velleman interface system - Currah microspeech - Ql - 512k exp.- Ql printer - Cst floppy interf.- Double 3.5 fd- Minerva - Qimi-and much more .
Re: divide 57c not working
Hello,
let's look for similarities
same system on CF-card and EEprom
Greetings,
Guenter
let's look for similarities
same system on CF-card and EEprom
Greetings,
Guenter
Re: divide 57c not working
the bare divide does not show the divide logo at startup .
i "mangled" the eprom .bin so that should be ok , but maybe you can share a .bin which is known to work
i "mangled" the eprom .bin so that should be ok , but maybe you can share a .bin which is known to work
- Zx81-16k exp.- Spectrum 48 - Spectrum 128- Interface 1& 2 - DIVide - Zx flashcard- Zx printer - Ram turbo-Velleman interface system - Currah microspeech - Ql - 512k exp.- Ql printer - Cst floppy interf.- Double 3.5 fd- Minerva - Qimi-and much more .
Re: divide 57c not working
copied folders on the fat 16 formatted cf card ; bin sys and tmp from esxide 085 zip file
use mangled esxide rom to flash eeprom , usedoriginal .bin to flash the eeprom
only result is a sinclair copyright screen nothing more ,
nmi only resets the spectrum
use mangled esxide rom to flash eeprom , usedoriginal .bin to flash the eeprom
only result is a sinclair copyright screen nothing more ,
nmi only resets the spectrum
- Zx81-16k exp.- Spectrum 48 - Spectrum 128- Interface 1& 2 - DIVide - Zx flashcard- Zx printer - Ram turbo-Velleman interface system - Currah microspeech - Ql - 512k exp.- Ql printer - Cst floppy interf.- Double 3.5 fd- Minerva - Qimi-and much more .
Re: divide 57c not working
Hello,
If ESXIDE.BIN was written into the EEprom with a programmer, it should already work.
If only the jumpers are set correctly!
here are some help pages:
http://www.esxdos.org/index.html
https://velesoft.speccy.cz/zx/divide/divide-jumpers.htm
If it doesn't work, convert ESXIDE.TAP to .wav
http://archive.sundby.com/mirror/www.wo ... wav1.8.zip
Copy the wav-file in your smartphone and load it into the ZX Spectrum.
Jumper E must be removed for flashing.
After flashing the EEprom, set jumper E again.
This is how it could work then,
Guenter
If ESXIDE.BIN was written into the EEprom with a programmer, it should already work.
If only the jumpers are set correctly!
here are some help pages:
http://www.esxdos.org/index.html
https://velesoft.speccy.cz/zx/divide/divide-jumpers.htm
If it doesn't work, convert ESXIDE.TAP to .wav
http://archive.sundby.com/mirror/www.wo ... wav1.8.zip
Copy the wav-file in your smartphone and load it into the ZX Spectrum.
Jumper E must be removed for flashing.
After flashing the EEprom, set jumper E again.
This is how it could work then,
Guenter