Anyone know if its possible to update the firmware on a PicoDivSD? I've had the device for years but started using it recently but I can't find any manuals online or anything.
I can run ESXDOS 0.8.5 on it but I'd like to get it updated to use long filenames if possible. I tried running the flash tool on the spectrum but it says to set JP2/E jumper which the board doesn't seem to have.
Any help would be amazing, thanks.
PicoDivSD update possible?
- lister_of_smeg
- Microbot
- Posts: 145
- Joined: Thu Nov 16, 2017 1:44 pm
Re: PicoDivSD update possible?
Have you tried removing the 'DIVSD DISABLE' jumper when the message appears?
Re: PicoDivSD update possible?
yeah, tried that yesterday, still comes up with CANNOT FLASH
- lister_of_smeg
- Microbot
- Posts: 145
- Joined: Thu Nov 16, 2017 1:44 pm
Re: PicoDivSD update possible?
You may need to unprotect the EEPROM first:
You could try using this guide.
I couldn't find the '1.TAP' or the '2.TAP' on Piotr's site, but I'm pretty sure '1.TAP' refers to the EPROTECT utility available here.
Use the 'ESXMMC.TAP' from your new ESXDOS zipfile (i.e. the latest version from the ESXDOS site) in place of '2.TAP'.
You could try using this guide.
I couldn't find the '1.TAP' or the '2.TAP' on Piotr's site, but I'm pretty sure '1.TAP' refers to the EPROTECT utility available here.
Use the 'ESXMMC.TAP' from your new ESXDOS zipfile (i.e. the latest version from the ESXDOS site) in place of '2.TAP'.
Re: PicoDivSD update possible?
That's got it Thanks so much. All running and looking great.