CENTIPEDE
=========

LOADING CENTIPEDE

The procedure for loading a program into your Spectrum is given on page 24 of the manual. 
Please follow these steps for loading Centipede.

1. Connect the ear socket of the computer to the ear socket of your tape recorder.
2. Set the volume control as per Sinclair manual.
3. Adjust the tone control to maximum.
4. Type Load "CENT".
5. Start the tape recorder. The program will AUTO RUN once loaded.


© Copyright 1982 DK'Tronics

This cassette contains four copies of this program, two on each side, if you have any loading 
problems, or if one of the copies gets damaged, then use one of the other copies. Before 
loading any program, please ensure that the heads of your cassette deck are clean and 
demagnetised.

The program recorded on this cassette and the packaging are copyright. No reproduction of 
this program is permitted without approval of DK'Tronics.

Manufactured and Distributed by DK'Tronics, 23 Sussex Road, Gorleston, Gt. Yarmouth, Norfolk