GOLD MINE ========= LOADING GOLDMINE The procedure for loading a program into your Spectrum is given on page 24 of the manual. Please follow these steps for loading Goldmine. 1. Connect the ear socket of the computer to the ear socket of your tape recorder. 2. Set the volume control as per Sinclair manual. 3. Adjust the tone control to maximum. 4. Type Load "". 5. Start the tape recorder. The program will AUTO RUN once loaded. NOTE: Side 1 - Introduction. Side 2 - Goldmine. © Copyright 1983 DK'Tronics This cassette contains two copies of this program, one on each side. If you have any loading problems or if one of the copies gets damaged, then use the other copy. Before loading any program please ensure that the heads of your cassette deck are clean and demagnetised. The program recorded on this cassette and the packaging are copyright. No reproduction of this program is permitted without approval of DK'Tronics Ltd. Manufactured and Distributed by DK'Tronics. Unit 2, Shire Hill Industrial Estate, Saffron Walden, Essex, England. Tel: (0799) 26350. Trade Telex: 81653 ATT DK’TRONICS.