REVIEWS COURTESY OF ZXSR

Datel Snapshot II
Datel Electronics Ltd
1986
Crash Issue 36, Jan 1987   page(s) 140,141

(Simon N Goodwin owns the copyright to this review. Please visit http://simon.mooli.org.uk to find original articles and updates, much new material and his contact details.)

Plug-in devices to save and alter programs are all the rage. Simon Goodwin presses the button on DATEL's Snapshot 2 and checks out the Genie package for ROMANTIC ROBOT's Multiface 1.

DATEL have just launched Snapshot 2, a new plug-in gadget to save programs in memory onto tape or Microdrive at the press of a button. There are several similar devices - Multiface 1, Interface 3, SpecMate and the MIRAGE Microdriver. Even a few disk systems, such as the Beta and the new Disciple, offer this feature nowadays, so it's obviously a busy market.

Some of these devices have - quite legitimately - annoyed software houses because they make it very easy to steal programs. The DATEL, like the Microdriver, is less prone to this criticism than other models, because you must have the interface fitted to re-load a file. This doesn't stop people borrowing software and making copies, but it's the best DATEL can do to discourage theft. This is a tricky issue, as I feel that piracy does reduce the volume and - especially - the variety of software that honest souls can buy.

Then again, high prices and inconvenient protection methods do not encourage honesty. I believe that people have a right to transfer software that they have bought onto disk or Microdrive, and this kind of device is often the only way you can do that.

DATEL feel that the Snapshot has three main selling-points, besides the obvious one I've dealt with above: there's a built in Kempston-compatible joystick port; you can modify bytes in memory; and the price is low - just £24.95. or £5-£15 cheaper than similar devices.

The Snapshot comes in the usual black box, with a red button on the left and the joystick port on the right side. You need the joystick socket even if you've already got an interface, because there's no through-port on the back. The documentation was folded under the interface - and consists of five white A4 sheets, with text printed in a dot-matrix font on one side of the paper. You also get a program, on cassette.

USING SNAPSHOT

Snapshot 2 is not immediately useful when you plug it in, because it does not contain any built-in software - you must load a small code file. It takes about a minute to load the supplied tape - you can transfer the code to Microdrive it you know how to convert the loading program, but the utility will not do this for you, and there are no conversion instructions. The code seems to load into memory hidden behind the Spectrum's ROM, so you can't access it except by pressing the button, which causes it to run. There's no information about the memory access mechanism in the documentation, which is a pity.

The software saves entire programs with their screens, to tape or Microdrive - there's no support for disk drives, although it should be easy enough to produce new software as an add-on. DATEL say they intend to do this, but they don't say which interfaces they will support or when the code will be ready. They also promise new software to copy screen images to a printer at the press of a button, as Muitiface 1 can do, They plan a package to control the speed of programs, rather like NIDD VALLEY's Slomo, but again there's no sign of the feature yet.

Once you've loaded the Snapshot software you can load the program you want to transfer to tape or Microdrive in the normal way. The Snapshot does not appear to use any of the standard 48K memory.

NO JOY JOYSTICK

Your program should load and run as normal with the Snapshot connected. I did find one strange problem with the built-in joystick port, which would not give a 'move left' signal if I plugged in a CHEETAH Mach 1 microswitch joystick!

The Snapshot interface worked OK with an older and nastier Quickshot 1, but I could not work out why the Mach 1 was incompatible. The stick works fine with a genuine Kempston interface, Multiface 1 and all the other makes of computer that litter my office, even including the wonky ports on Amstrad's Plus Two, so I'm inclined to blame DATEL for this incompatibility. I'll contact DATEL and CHEETAH, and should be able to get both replies into print next month.

I had a look inside the Snapshot to see if there was an obvious fault, but I couldn't see anything likely to cause the problem. The internal construction of DATEL'S interface was rather nasty - the red button was only held in by a blob of glue on the circuit board, although the joystick socket was securely fitted. A bare wire was soldered to the underside of the board, passing within a millimetre of several soldered connections that it was clearly not meant to touch.

Anyhow, I carried on with the test using the Quickshot. When the red button is pressed the computer immediately stops whatever it is doing and prints a blue and yellow menu on the top eight lines of the screen. There are five options, each selected by a single key-press. S saves the contents of memory onto tape or Microdrive. A second prompt appears to ask you which device is to used for the save, and you are then asked to type the file name.

For some reason the program selects Caps Lock - all capital letters - as you enter the file name. I've never understood why computer enthusiasts are so keen on WRITING EVERYTHING iN CAPITALS, so I pressed Shift and 2, which normally cancels Caps Lock. This it did, but not before printing LOAD "", rather disturbingly, in the input window. I tried again and got Caps Lock back, but LOAD "" popped up somewhere else. This does suggest that DATEL have not tested their software very carefully. One good feature is that ENTER on its own gets you straight back to the main menu.

The A menu option lets you alter or examine memory. The prompt 'Address' appears, and you must type in the number of the memory location that you want to change. The computer then prints the present contents of that byte, and asks you to type a replacement value. It you press ENTER on its own, the computer steps on to the next address and so on.

This feature is very useful if you want to put POKEs into a game without messing around with the loading program. You can stop the progression through the memory by typing a full stop, when you are asked for a new address. Values can be printed and entered in decimal or hexadecimal. You must type a hash character at the start of the address if you want to use hex. Press ENTER on its own to get back to the main menu.

The next option, G, lets you go back to the current program - the top part of the display is restored as if you had never pressed the button. You can only return to the exact point at which you stopped the program - you can't jump to a specific address.

The L option is used to load a file that has been saved previously with S; ENTER on its own loads the next file in this case, but you can break into the load in the usual way.

K 'kills' the current program, resetting the computer but leaving the Snapshot routines in memory.

TESTING

The biggest problem with the Snapshot is that it doesn't seem to work with most commercial programs. I tried it with a collection of games, and VORTEX'S aging Android 2 was the only one that was transferred properly.

Snapshot can compress programs to reduce their disk or tape storage requirement, and Android 2 was condensed into a single 29K file, including the screen, in 25 seconds. I'd like to give more examples, but I didn't manage to copy anything else!

On The Run, from DESIGN DESIGN, and MICROMEGA/Derek Brewster's Codename Mat started to save, but the screen filled with gibberish after a few blocks had been written to Microdrive and the only way out after that was to pull the plug.

I spent quite a while re-loading these games and trying again, pressing the button at various points after loading, but I never managed to save anything useful. At one point I pressed the button while On The Run was playing and the machine crashed without even printing the Snapshot 2 menu - about half of the 'Alter' menu appeared, then my trusty Spectrum locked up.

I tried to transfer CHEETAH's SpecDrum program to Microdrive; this is a prime candidate for conversion from tape. Again the machine spun the drive for a while, then locked up. Repeated attempts gave the same result, so I used ROMANTIC ROBOT's Multiface 1 - the only other such utility I have - and everything went smoothly. If Android 2 had not copied properly I would have suspected a duff Snapshot interface. Since Multiface copied the test programs without trouble it seems likely that there's something wrong with DATEL'S software.

SNAP DECISION

Snapshot 2 has a lot of competition, and it doesn't seem to work very well. Unless you're very short of cash, and you only want to convert simple programs, I can't recommend this product.


REVIEW BY: Simon N Goodwin

Transcript by Chris Bourne

All information in this page is provided by ZXSR instead of ZXDB