Inlays viewer
Re: Inlays viewer
Silent Service and AcroJet were published in Europe by US Gold. Microprose didn't think they were getting a good deal from US Gold, so they opened their own division in the UK so they could publish their games themselves.
- saucysarah
- Drutt
- Posts: 30
- Joined: Tue Apr 28, 2020 1:59 pm
Re: Inlays viewer
@pavero Hi, are you keeping a list of what's missing when you do these inlays ? If so, any chance you could share it ? For instance, what's missing from the Codemasters inlays, maybe the CD Pack. I saw the basic list on the previous page but what are the '+' signs next to some of them mean ? Thanks in advance. (Missing your updates ).
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
Good question. Here you go ...
https://spectrumcomputing.co.uk/missing_inlays.php
https://spectrumcomputing.co.uk/missing_inlays_list.txt
I would say CodeMasters inlays are complete, only CD pack is missing ...
'+' - inlays from these publishers were fully restored (removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/missing_inlays.php
https://spectrumcomputing.co.uk/missing_inlays_list.txt
I would say CodeMasters inlays are complete, only CD pack is missing ...
'+' - inlays from these publishers were fully restored (removed scratches, tears, marks, etc.)
- saucysarah
- Drutt
- Posts: 30
- Joined: Tue Apr 28, 2020 1:59 pm
Re: Inlays viewer
Thanks for the list. I take it you've cleaned the list of all the inlays that you have but haven't posted yet ?
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
Yes, if we are talking about these publishers:saucysarah wrote: ↑Thu Jul 23, 2020 9:29 pm I take it you've cleaned the list of all the inlays that you have but haven't posted yet ?
Elite, Micromania, Micromega, Microsphere, Power House, US Gold, Ubisoft, Cronosoft, CRL, Tynesoft
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Bulldog Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 969&kind=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 969&kind=1
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Hi-Tec Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 873&kind=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 873&kind=1
Re: Inlays viewer
Thank You @pavero Your hard work is much appreciated!pavero wrote: ↑Wed Aug 12, 2020 7:16 pm All Hi-Tec Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 873&kind=1
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All System 3 Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 137&kind=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 137&kind=1
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Software Projects inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 531&kind=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 531&kind=1
- Juan F. Ramirez
- Bugaboo
- Posts: 5149
- Joined: Tue Nov 14, 2017 6:55 am
- Location: Málaga, Spain
Re: Inlays viewer
Hi [mention]pavero[/mention] !pavero wrote: ↑Thu Sep 10, 2020 6:38 pm All Software Projects inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 531&kind=1
Just noticed the Dragon's Lair inlay doesn't have "OWNED BY MAGICOM AND USED BY PERMISSION" text along with the (R) symbol in the spine side.
The previous file (from old WoS) did have it, whereas [mention]Mort[/mention] 's site did have it too, what made me think it was erased while restoring, maybe?
If not, we should keep the previous one as an alternate inlay.
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
Good point! The text is almost invisible on some inlays, so it was really removed. Fixed now!Juan F. Ramirez wrote: ↑Sun Sep 13, 2020 10:10 pmHi @pavero !pavero wrote: ↑Thu Sep 10, 2020 6:38 pm All Software Projects inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 531&kind=1
Just noticed the Dragon's Lair inlay doesn't have "OWNED BY MAGICOM AND USED BY PERMISSION" text along with the (R) symbol in the spine side.
The previous file (from old WoS) did have it, whereas @Mort 's site did have it too, what made me think it was erased while restoring, maybe?
If not, we should keep the previous one as an alternate inlay.
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Bubble Bus Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 952&kind=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 952&kind=1
- saucysarah
- Drutt
- Posts: 30
- Joined: Tue Apr 28, 2020 1:59 pm
Re: Inlays viewer
Thanks for all the remasters Pavero! How's it going with the US Gold inlays ? Just wondered, are you waiting to get the full set before posting because I think you said some of the compilations were missing ?
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
Yep I am still waiting, but 94% of US Gold inlays are ready now.
https://spectrumcomputing.co.uk/missing_inlays_list.txt
https://spectrumcomputing.co.uk/missing_inlays_list.txt
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Alternative Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 782&kind=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... 782&kind=1
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Atlantis Software inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... =1&kind2=0
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... =1&kind2=0
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Zeppelin Games inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... =1&kind2=1
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... =1&kind2=1
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Players inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Blue Ribbon and Infogrames inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
Re: Inlays viewer
Well done Pavero, will keep on teeing them up for you this end also
Scanner extraordinaire, 1000`s of magazines and Software from the 8 and 16 bit era now up on internet archive in lovely 600dpi.
Donations are welcome of items to scan that are no longer needed
Donations are welcome of items to scan that are no longer needed
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All Sparklers inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
All TopTen, TouchDown and TopShots inlays were fully restored!
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
(removed scratches, tears, marks, etc.)
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
https://spectrumcomputing.co.uk/inlays_ ... assettes=0
- pavero
- Dynamite Dan
- Posts: 1603
- Joined: Sat Dec 09, 2017 11:49 pm
- Location: The Czech Republic
- Contact:
Re: Inlays viewer
OK, I will tell Einar to return it back ...